Portabl Wind Tunnel - Design & Dimensions


	CIVENG UNSW

Environmental Emissions & Odour Laboratory


About odour : Sampling : Wind Tunnel Dimensions		Main Sections: Home \| About Odour \| Services \| Reserch \| Staff \| Workshops/Training \| Links \| Site Map

- Odour Sampling

- VOCs Sampling

- Odour Sampling Bags

- Flux Hood

- Wind Tunnel (WT)

- WT Dimensions

Introduction of odour sampling devices and equipmets - flux hood, wind tunnel

UNSW wind tunnel dimensions

An isometric drawing of the UNSW wind tunnel

Figure 1 An isometric drawing of the UNSW wind tunnel

The UNSW wind tunnel

Figure 2 The UNSW wind tunnel

Please note: The mixing chamber has been extended from 100 mm to 200 mm to avoid the interferece from the ambienet air and provide a better mixing condition.

Extension inlet duct for wind tunnel

Figure 3 Extension inlet duct

Flat vanes for wind tunnel

Figure 4 Flat vanes

Baffle for wind tunnel

Figure 5 Baffle
(coming soon)

Figure 6 Sampling tubing arrangement


	Environmental Emissions & Odour Laboratory Centre for Water & Waste Techology The University of New South Wales Sydney 2052, Australia Tel: 61-2-9385 5452 Fax: 61-2-9313 8624 Email: odour@unsw.edu.au	Last Modified :: Privacy Policy \| Copyright & Disclaimer